Slide background

Why you should choose

temarry recycling

Recycling Services

Temarry Recycling provides efficient recycling services in the management of recyclable hazardous and non-hazardous wastes that are compatible with our distillation and Waste to Energy systems. Liquids received are filtered and blended in one of our blending tanks and then directed to one of our solvent recovery stills. Solid waste received is thermally treated at 1500°F using the heat value to generate steam that operates our recovery stills. We receive liquids, solids, semi-solids and sludges for recycling. Material can be shipped in drums, cubic yard boxes/bags, totes and tankers.

Types of wastes that can be received are:

  • Flammable solvents including alcohols
  • Ketones
  • Naphtha
  • Paint related materials
  • Flammable mixtures with and without halogens

Most organic solids with fuel value. Non RCRA waste including oils, oily water, antifreeze and latex paint.

Through a highly coordinated truck transportation network, Temarry Recycling provides reliable, cost-effective transportation for cradle to grave waste management. All waste is processed on site receiving an H020 handling code for distillation or an H050 handling code for, “energy recovery at this site”.

True Closed Loop Recycling

Solvent Recycling and Energy Recovery Process

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
True-Closed-Loop-Recycling-Process
1

Waste solids are received, sorted and finger print analysis performed

2

Solids are packaged into proper size burnable containers and placed on the feed conveyor

3

Burn in the primary chamber is initiated by clean burning propane gas that heats the primary chamber to 1500 F, which is the basic operating temperature. Once at this operating temperature, the unit becomes self-sustaining and the primary burner turns off. Heat then travels to the secondary chamber.

4

Solids, or ash, fall out of the burn unit on to the ash conveyor system and deposited into an ash hopper. Ash is later blended with other liquids for cement kiln fuel blending.

5

All vapor from the primary burn chamber are directed to the secondary chamber where there is a retention time of 2.5 seconds. All volatile organic compounds are eliminated by thermal destruction.

6

Thermal energy is converted to steam in our 200 horse power boiler. Steam is directed to the distillation units for use as a heat source.

7

Additional heat from the boiler is directed to a two stage venturi scrubber system to insure that only clean water vapor is emitted to the atmosphere

8

Stage two of the two stage gas scrubber

9

Waste solvents are received, sorted and finger print analysis performed

10

Liquid drums are pumped and filtered

11

After filtering, solvents are pumped to the distillation unit

12

Volatilized solvent vapors expand into the fractionation column

13

After the frac column comes the heat exchanger that cools off the solvent.

14

Pure solvent is cooled down through a heat exchanger and is directed to a finished product tank

15

Product is packaged into drums and totes for distribution back in to  industry

16

Temarry Group III and group VII waste is received in drums Totes and Tankers for treatment and water recovery. After initial inspection waste is filtered and transferred to tanks 17 and 18

17

Initial settling tanks for corrosive and other water base waste. Oil is skimmed off the top and solids are phased separated at the bottom. Water is extracted from the middle of the tank and transferred to tank 19.

18

Initial settling tanks for corrosive and other water base waste. Oil is skimmed off the top and solids are phased separated at the bottom. Water is extracted from the middle of the tank and transferred to tank 19.

19

Initial treatment and neutralization tanks. Water is extracted from the middle portions and transferred to tank 20.

20

Final settling and Clarification Tank

21

All settled solids are transferred to filter press for dewatering creating Filter Cake. Filter Cake is processed through Waste to Energy to remove any remaining organic content. Waste to energy ash is blended with distillation still bottoms and sent to cement kilns for off-site recycling as blended fuel.

22

Final filter before going to Clean Water storage tank.

23

Finished Product 20,000 gallon storage tank displaces formally purchased water for facility processing.

24

Water softening process removes minerals before being sent to various onsite needs including Cooling tower, venturi scrubber and primary combustion chamber.

25

All settled solids are transferred to filter press for dewatering. Filter press waste is blended with Waste to energy ash and distillation still bottoms and sent to cement kilns for off-site recycling.

How Can Temarry Recycling Help You the Most?

Contact us and we will discuss how you can achieve a higher level of sustainability with cost efficiency.